SCREENINGS PRESS AND CONVEYING:

 

CP – SHAFTLESS SREW CONVEYOR AND COMPACTOR

Our CP – SHAFTLESS SCREW CONVEYOR AND COMPACTOR is a combined unit used for conveying and

compaction of the waste.

It consists of the drainage area, normally placed in front of the loading hopper, which has the function of

allowing the evacuation of the liquids contained in the input material; the transport area, consisting of a

trough and a spiral without a central shaft, and finally the compaction module, which allows a reduction in

volume and weight of waste by over 50%, depending on the type of material transported.

The spiral is normally connected directly to the geared motor by a flanged shaft and seal assembly is present

to prevent any leakage of liquids from the gear motor zone. The machine works in a range of inclination 5 ° -

35 °, and, if requested, a washing system can be installed in the transport zone in case of special executions .

CPP – SCREW SCREEN PRESS

Our CPP - SCREW SCREEEN PRESS simultaneously provides the function of drainage and waste compaction.

The compactor can be placed directly below the output of a coarse filtration machine or it can be fed by a

conveyor.

The machine is composed of an input hopper connected to a tubular trough that composes the waste

drainage area and it’s equipped with a washing system to ensure a more high removal of organic substances

contained in the waste materials.

The compacting zone is realized by a discharge pipe shaped "proboscis" which give to the machine great

dewatering performance.

The excellent cleaning of the gratings and the high degree of compaction (up to 60%) reached, allows a

reduction of odor problems and disposal costs.

 

All Rights Reserved to Fluiteco s.r.l 2020

  • Facebook - Grey Circle
  • LinkedIn - Grey Circle
Fluiteco_sito_Logo.png
Screen Shot 2019-07-31 at 10.40.05 AM